teknoloji etiketine sahip kayıtlar gösteriliyor. Tüm kayıtları göster
teknoloji etiketine sahip kayıtlar gösteriliyor. Tüm kayıtları göster

9 Mart 2009 Pazartesi

vsep



VSEP Membrane Cleaners In addition to filtration systems, New Logic manufactures a complete line of chemical cleaners designed to maintain maximum flow rates in all VSEP applications.Years of exhaustive research and development by New Logic engineers have resulted in seven chemical cleaners formulated to attack the most stubborn foulants across a wide range of membranes and feed streams.While designed for VSEP membrane filtration systems, these advanced formulas are perfect for cleaning any membrane.To learn more about VSEP Advanced Cleaning Solutions, please choose a link below to visit our sister site http://www.membranecleaner.com/.






While membrane-based separations of liquids from solids have enjoyed increasing popularity over the last 20 years, the technology has an inherent Achilles heel that affects all membrane devices: fouling. This long-term loss in throughput capacity is due primarily to the formation of a boundary layer that builds up naturally on the membranes surface during the filtration process.In addition to cutting down on the flux performance of the membrane, this boundary or gel layer acts as a secondary membrane reducing the native design selectivity of the membrane in use.

5 Mart 2009 Perşembe

THE LAST DAYS OF PRİVACY

As technology makes life richer and easier, we leave a trail of information that is susceptible to prying eyesWithin the next four months, a major Bay Area supermarket chain plans to introduce a payment system that uses biometric fingerprint authentication to verify customers' identities. Under this system, shoppers in checkout lines won't need to use cash, checks, debit cards or credit cards. Instead, they can place their fingers on scanners that read fingerprints, and once the device links to their bank or credit card accounts, they can buy groceries, get cash back and do everything else shoppers do.[Podcast: Insight Editor Jim Finefrock and reporter Jonathan Curiel talk about how Americans might as well face up the fact that there is little privacy left.]The system is already used in cities around the United States, including Portland, Ore., and Chicago, where one shopper says it has changed his life for the better. Linc Thelen, a 37-year-old interior designer, says the fingerprint system -- known commercially as Pay By Touch -- is convenient to use and expedites his way through grocery lines at Jewel-Osco, where he shops. Thelen says the system lets people leave their wallets behind, so they don't have to worry about being robbed or losing their credit cards."I had no reservation," Thelen said in a phone interview. "It's a safe way to store information."But no system is 100 percent foolproof.Despite the fact that armed men guard the computers that store the customers' virtual fingerprints, despite the fact that Bank of America's former security chief now heads Pay By Touch's security division, and despite the fact that Pay By Touch hires people to try to expose vulnerabilities in its computer system (so those vulnerabilities can be eliminated), Pay By Touch President John Morris acknowledges that "it's not impossible" for computer hackers to figure out how to tamper with its information.And therein lies one of the 21st century's most vexing problems: More and more of our personal data are captured and stored by corporate and government interests, and are potentially available to anyone with the technological, legal or financial means to access that information.Whether it's phone calls we make, library books we check out, CDs we buy on the Internet or divorces we finalize in court, we leave a trail of information that becomes susceptible to prying eyes. For the price of a bus pass, you can pay a company to supply anyone's address, phone number, political affiliation, estimated income and property history. For $20 more, you can find out if that person is married or divorced, has a criminal record, and what sort of jobs he or she has worked.Sen. Hillary Clinton, D-N.Y., says she will introduce a "privacy bill of rights" because identity theft and security failures of personal records have become "one of the most important issues facing us as individuals and as a nation."The availability of personal information -- downloadable onto laptop computers, which are increasingly being fitted with fingerprint technology -- is changing the culture in ways that may seem trivial but are really benchmarks for a new society already in its formative stages.A small example: Unbeknownst to the men who date her, Judy runs background checks on all of them, using a private investigator to dig out any "red flags" that would presage troubling behavior. A businesswoman in Southern California, Judy, 50, uses a company called DateSmart, whose client base has boomed in the past five years as more people confront the perils of online dating."I'm glad the information is out there," says Judy, who did not want her last name used because of concerns her suitors would read this article. "The men I'm talking to online are complete strangers. And I have absolutely no knowledge of their character other than what they're saying in their profiles. I need to feel comfortable knowing that they're not an ax murderer. The people you meet might be well dressed, but you never know if they have any criminal history. It's for (my) safety."Background checks are nothing new. What's changed are the speed with which you can obtain them, their relatively small price (some companies advertise free checks) and their growing public acceptance. The information revolution has transformed the background check into a common and casual tool, and those being scrutinized probably don't have a clue. More obvious are the security cameras embedded in nearly every major American city, including New York, Milwaukee, Chicago, Atlanta, Los Angeles and, yes, San Francisco, where lenses record people's activities in such crime-ridden neighborhoods as Bayview-Hunters Point and the Western Addition. The spread of these cameras is championed by authorities, who say it reduces criminal activity, and criticized by the ACLU, which says the equipment is an unnecessary intrusion into public spaces.Civil liberties groups have joined the widespread outcry against the government's monitoring of Americans' phone-call records. Two weeks ago in federal court, the ACLU challenged the legal rationale behind the National Security Agency program, arguing that the NSA's actions -- involving "data mining" of records provided by AT&T and other telephone companies -- violate Americans' rights to free speech and privacy as guaranteed under the First and Fourth Amendments. Last week, privacy experts raised questions about the U.S. government's monitoring of international bank transfers -- previously secret data surveillance officials say is justified by the fight against terrorism.Americans' rights to privacy will be tested even more in the next few years as biometric technology creeps increasingly into everyday arenas. For example, on the campus of UC San Diego, biometric experts are testing a soda machine that uses both fingerprint and face-recognition technology. The machine is in a lounge for grad students in UC San Diego's computer science building."The students are very excited about getting it working," Serge Belongie, a UC San Diego associate professor of computer science, says in a phone interview. "People think it's very cool. ... No one uses money. They have accounts. What would be fun is if (the machine) recognizes you and says, 'Would you like your usual?' "If UC San Diego students are reluctant to use the machine, their privacy concerns are outweighed by convenience -- a sentiment echoed in survey after survey on biometric technology. In March, Unisys Corp. released a report on public perception of "identity management" that said convenience and efficiency were the two biggest reasons consumers would use biometric technology. (The most preferred biometric methods are fingerprints and voice recognition, according to the survey. The least preferred, because of its perceived intrusiveness, is an iris or eye scan.)Two of the biggest turnoffs for those who shun biometric technology: suspicion of how the technology works and loss of privacy. Among respondents from North America, just 56 percent said they'd be willing to share their fingerprint with a government organization such as a post office or tax authority. Among respondents from the Asia-Pacific region, 71 percent said they'd share their fingerprint with the government."As consumer confidence grows in the large-scale usage of (biometric technology) and standards are more generally comfortably adopted, you're going to see a pretty rapid migration" to it, says Mark Cohn, Unisys vice president for homeland security solutions.Cohn, a principal architect of the Department of Homeland Security's US-VISIT Exit system, which uses fingerprint technology to run background checks on visa applicants and verify their entry to and arrival from the United States, says Malaysia offers a preview of how the United States may change in the coming years.Since 2001, the Malay government has issued a biometric "multipurpose card" to Malaysians 12 years and older. The card, which features a thumbprint and photograph, acts as a passport, driver's license, ATM card, toll and parking pass, and medical record that lists blood type and any allergies.The card is convenient to use -- but it's a nightmare for Malaysians who lose it or have it stolen. Crime syndicates in Malaysia have altered cards with different photographs and used them to give members new identities, though the Malay government insists these identity thieves can't access the original cardholders' personal information. Special chip technology and other password features prevent this, they say. Also, the cardholder's fingerprint -- rather than being visible on the card -- is encrypted in the card itself: To reveal the fingerprint, the card must be inserted into a special biometric device that compares the encrypted print with that of the person claiming to be the cardholder.For anyone who has read Orwell's "Nineteen Eighty-Four," where "telescreens" keep track of people's lives, this new biometric technology will seem like fiction come to life. It's showing up everywhere. By the end of this year, U.S. passport agencies hope to issue "electronic passports" with computer chips that have digital photos of the holders. With the help of face-recognition machines, airport security can compare a photo with the face of the passport holder. For two years, an American corporation, VeriChip, has sold government-approved electronic chips that are inserted under people's skin to give doctors instant access to patients' medical histories.In 2008, as mandated by the Real ID Act, states plan to issue driver's licenses linked to a database that includes each license holder's photo and Social Security number. These licenses (civil liberties groups call them national identity cards) will likely include a biometric photo of the driver accessible by authorities.In the meantime, banks are considering using iris scans and even palm scans at ATMs in an effort to cut down on fraud. (In 1999, Bank United in Texas adopted iris-scan technology at three of its ATMs in a test that was discontinued when Washington Mutual took over the bank.)Some people love the new technology. Others shun it.Pay By Touch admits it has encountered some resistance among shoppers it approached in supermarkets that already use the company's fingerprint service. But Morris, its president, says many of these customers are quickly won over by the convenience of Pay By Touch, which is free for consumers, and that the company keeps data points based on users' fingerprints, not actual fingerprints. So far, supermarkets in 40 states use the Pay By Touch system.Pay By Touch, which is based in San Francisco, wouldn't say which Bay Area supermarket chain will start using its fingerprint system in the next four months -- only that the chain will use the system in just a handful of its Bay Area stores. Pay By Touch users sign up voluntarily and are under no obligation to use it at the checkout line.Pay By Touch says it takes great care to safeguard its users' data. After fingerprints are converted into algorithms, they're encrypted, then stored in IBM computers. Those algorithms can't be reconverted into an exact copy of the fingerprint, though Pay By Touch may eventually store users' actual fingerprints if the technology improves, Morris says. The company insists it will never sell users' personal information or fingerprints to anyone else -- a pledge that's backed up in writing when users sign up with the company. But what if federal authorities, citing national security, insist on the finger scan and payment history of a Pay By Touch user?Pam Dixon, who heads the World Privacy Forum, a public research group, went to Chicago to warn potential Pay By Touch users about possible dangers."It didn't stick," she says. "People were (more) concerned with (convenience than) the potential risks. People can put their thumb on a pad and be done with it. But meanwhile, their biometric data is sitting with another company, a third party, that's subject to subpoena. One argument that I made: Let's say that every supermarket in the country, particularly the large chains, (use) a biometric payment system. It's a law enforcement dream because who needs a biometric database run by the U.S. government when you've got one being run by private companies?"Citing the recent disclosure by the Veterans Administration, which said a computer with credit information on millions of veterans had been stolen, Dixon says, "The second issue is information security. If the VA can't keep its records secure, which is a government agency that has all sorts of strict controls that are supposed to be in place, how on Earth can a private company without the resources of something like the VA manage to keep something secure? When we have a credit card stolen, we can call the credit card company and say, 'Give me a new number.' But you can't do that with your biometric. You can't say, 'Give me a new fingerprint.' "Morris dismisses such concerns, saying that Pay By Touch will actually decrease the likelihood that consumers' credit information is stolen or misappropriated. "I think (Pay By Touch users) get pretty rapidly that it's the ultimate way to secure their private data," he says. "It connects (their accounts) to something that's uniquely them, as opposed to handing a credit card over to a stranger or writing a personal check that seven or eight humans touch before it gets in their statement. Securing information by a biometric is a giant leap forward. (Users) like that they don't have to pull their card out anymore. They (tell us they) like that they don't have to carry their (purses or wallets) through the parking lot of an urban supermarket. There's a physical security benefit. Their numbers are never displayed. The safety of securing their data is the No. 1 thing they like."The marketplace will determine whether the public is ready to accept commercial fingerprint identification. Investors in Pay By Touch believe that day is here, capitalizing the company with $190 million in the past 12 months. More than 2.5 million shoppers already use the Pay By Touch system. Morris envisions a day when all stores -- even mom-and-pop ones -- offer a Pay By Touch option.Soon, customers will be able to use Pay By Touch from home with the help of fingerprint readers attached to their computers. In ancient China, rulers would put their fingerprints on documents to give them an official seal. Artists would also mark their work with prints. It wasn't until the late 1800s that authorities realized they could use fingerprints to catch criminals. Their evolution as a way to pay for groceries is a 21st century twist fueled by technology. It's also a trade-off between privacy and convenience. Welcome to the brave new world in Aisle 5.

Piezo-actuation and PIEZOMECHANIK


Piezo-actuation based on discretely stacked high voltage multilayer elements has been introduced end of the Sixties as a remotely acting superfine adjust for optical components. Especially coherent optics and here the up-coming laser – technology were the main trigger. To introduce this new technology. In so far, optics can be designated as the “mother of multilayer-based piezo actuation”. The first stack actuators were high voltage type for driving voltages typically up to 1000V built up from standard PZT components like discs or plates bonded by adhesives.
The next very important step towards a broader application of piezo-actuation was the introduction of so-called co-fired monolithic piezo-elements . This step was done end of the Seventies.By this technology small-sized actuators for low voltage operation can be produced in larger quantities. At this time, another feature of piezo-actuation besides “super-positioning” came to higher interest: the generation of high forces and large acceleration rates based on the solid state properties of PZT ceramics. A first application was the use as impactors for the needles within needle-impact printers. The needle-printing principle disappeared by time, but another high speed mechanical switching application came up and represents now the larges application volume: the piezo-based fuel injection technology for super-modern Diesel common rail engines.
Currently, there are three main fields of piezo actuation

Ultra-fast mechanical switching (fuel injection and other valve controls)

Ultra-precise positioning e.g.in semi-conductor industry / glass fiber technology

Active vibration control (vibration generation, vibration cancellation, adaptronics)
The professional career of Dr.Lutz Pickelmann as the founder and owner of PIEZOMECHANIK was parallel to the history of piezo actuation: Lutz Pickelmann came into a first contact with piezo actuators as a student, when he was setting up a high resolution Fourier- spectrometer for the near infrared spectrum. The rather difficult requirements for stabilizing the optomechanics of the interferometer were only fulfilled by the use of super-precise electrically controlled piezo-actuators. The technology was an exotic one at this time and the piezo-stacks were self-made. Upon the proposal of Lutz Pickelmann ,a rather exotic application of Fourier-spectroscopy at this time was the investigation of the spectral response of eyes-cells of drosophila-flies. The experiments were then carried out by R. Gemperlein / Institute of Biology / Munich University and H.Parsche / Physics Dept.E14 / Technical University of Munich.
The trend towards highly dynamic piezo actuation was increasingly reflected by PIEZOMECHANIK’s product range. High power frequency tuneable vibration systems are offered as well as high power axial shock generators. The high potential of piezo actuation for ultra-ynamic mechanics is shown by the use of big sized piezo-stacks as shock-generators for chiselling. (in cooperation with Hp.Schad / HILTI / Liechtenstein). Mechanical deformation energy in the Joule range is produced within ultra-short time periods within a few Tens of microseconds. Acceleration rates exceeding 100.000m/sec² have been demonstrated.
High power piezo-actuation is further the topic of various projects in the field of adaptronics. Like active vibration control even of very heavy and bulky structures like car-bodies, air-frames or tooling machines. Beside these main stream activities, PIEZOMECHANIK supports continuously exotic new applications like actuator systems running at cryo temperarture < 4°K e.g. for the dynamic tuning of superconducting resonators for accelerators used for the spallation neutron sources .

dakato ultrasonics


The MINI-MAX, Ultrasonic Bolt Tension Monitor, defines the state of the art in the measurement of the actual elongation produced by tightening a threaded fastener. The MINI-MAX can measure the elongation very accurately in fasteners of virtually any material from 1/2 inch to 4 feet in length. The measurement is achieved by determining the change in the transit time, of an ultrasonic shock wave along the length of the fastener as the fastener is tightened by any method. The on-board microcomputer automatically interprets this time measurement to display the time(nanoseconds), elongation, load, stress, or %strain from stretching a fastener.Welcome to the Dakota Ultrasonics website!We are a manufacturer of industrial ultrasonic testing equipment most commonly used in the petrochemical, aerospace, automotive, and other generally related industries. The pages that follow will provide you with general information regarding our products. If you have any questions, need technical support, or have a request for custom items, please contact us at your leisure using the information provided on this site.Our products are commonly used to determine the thickness of a variety of materials by making contact with only one side of the material being tested. They have the ability to detect very fine pits, flaws, and porosity in materials without having to destroy the material or parts being tested. This is done by converting the transit time of a sound wave, sent into and reflecting back from a defect or opposite surface in the test material, into a length measurement. This technique uses principles similar to that of sonar.We also manufacture a line of ultrasonic bolting equipment that very accurately measures the stress, elongation, and load in threaded fasteners. These products are typically used in critical bolting applications where extreme accuracy is needed. If you have any specific or specialized bolting applications in mind, be sure to contact us to discuss your requirements in detail.

1 Mart 2009 Pazar

Free Modbus Scanner

Free Modbus Scanner




Powered by DAQFactory, the QuickMod Modbus scanning tool allows you to quickly monitor a group of addresses from your Modbus device connected over ModbusRTU on RS-232 / RS-422 / RS-485, ModbusRTU over Ethernet, or ModbusTCP. You can read Coil and Input status, and Input and Holding registers in various data forms from standard 16 bit integer words to floating point values. You can even view a graph of any one of your addresses.

Best of all its free! QuickMod was developed by AzeoTech using DAQFactory Developer and therefore runs without any license fee on any DAQFactory installation, including a DAQFactory trial. Once the trial period is over, QuickMod will still work!

Plus, if you decide to purchase a DAQFactory license, you can modify the QuickMod application for your own use, adding new screens, reading more inputs, controlling outputs, logging the data, creating automation loops, generating emails, and any other of the many features available in the various versions of DAQFactory.

To get QuickMod, click on the link below to download the DAQFactory trial. QuickMod requires DAQFactory but will continue to work even after the 25 day DAQFactory trial expires.



DDR-150 Rotary Positioning Stage



Direct drive brushless DC servo motor

  • Precision ground ABEC-7 4-point contact bearings
  • Durable stainless steel top plate with through hole
  • Resolution to 0.2 arc seconds
  • Highly repeatable Hall effect home and limit switches
  • Optional encoder scale cover
  • Ideal for:
    • Wafer Inspection
    • Precision Assembly
    • Laser Machining

Low Profile Direct Drive Rotary Stage

Anorad's new DDR-150 rotary positioning stages are designed for precise position and velocity control in light to medium force applications. High performance is achieved through use of a brushless DC servomotor, high resolution optical encoder and precision bearing set all housed in a compact and precisely machined aluminum base with a rugged stainless steel top plate.

The direct drive servo control of the brushless DC motor has several advantages over conventional gear driven rotary stages. Backlash is eliminated, torque variation is minimized, plus gear and brush wear are no longer factors in long term usage. Added benefits include speeds up to 360 rpm, 0.2 arc second resolution and ±1 arc second repeatability. Step-and-settle time is also reduced due to increased servo bandwidth.

Available options for the DDR-150 include a variety of encoder resolutions to meet your speed and accuracy requirements. An axial through hole for use with pneumatic or optical devices; adjustable home, limit and hardstop positions; and a sheet metal cover to protect the encoder and internal components.

Specifications
ParameterSpecificationParameterSpecification
TravelunlimitedMaximum Velocity21273 rpm
Accuracy±20 arc secAcceleration34 rad/s2
Repeatability1 (bi-directional)±1 arc secAxial Capacity25 kg
Resolution10.214 arc secAxial Runout (TIR)5 µm
Stability±2 countsRadial Runout (TIR)5 µm
Minimum move10.5 arc secWobble3±8 µm
Peak Torque7.4 NmThru Hole diameter35 mm
Continuous Torque1.4 NmConcentricity (Thru hole)±2 µm
Inertia
0.217 kg-m2Stage Weight3.5 kg

DDR-150 ConstructionMechanical Features
Stationary BaseHigh strength aluminum alloy with black anodized finish (Nickel plating optional)
Rotating Table
Stainless steel with passivated finish
Bearing System
ABEC-7 precision ground 4-point contact radial bearing
Encoder
Incremental optical encoder with reflective tape scale (50 lines/mm)
Limit SwitchesHall effect home and limit switches

  1. With 0.214 arc sec resolution (256x multiplication)
  2. At lowest resolution (top speed dependent on controller and resolution)
  3. Measured at 60mm radius

PORTABLE FLOWMETERING / THE GOOD EXPERT NEEDS THE

30 years of experience and 6 generations of instruments (M210, M211, UF 320P, UF 321T, and now DigiSonic and Minisonic) permit us to offer the best of the technology and moreover the most pertinent information linked to your measurements works.


To justify a measurement means being able to criticize it even on a pipe with one inaccessible pipewall.
To this end, our instruments are composed of (in accordance with our specification sheet)
- an internal or external thickness measurement
- a dynamic analyser of the " echo " signals, indeed a numeric oscilloscope function (Digisonic) because every pipe can disclose surprises
- an optimization function of time measurement, metrological advantage in comparison to correlation or phase difference measurement
- an access to physical measurements, like the " delta T ", the speed of sound, the signal level and their quality indexes.

The carrying out of a measurement must be as simple with :
- a choice of adapted and high performance probes, including their supports
- simple and complete intuitive menus in your own language
- a readable, numeric and graphic display
- simple possibilities of data logging and export to the PC and printing possibilities.
- an important battery life and a fast charge of the battery
- a robustness for field survey work

Our applications have few limits and constantly improve themselves, accepting from ultrapure liquids to the one relatively charged or viscous and of pipes from 8mm to 5000mm.

As an example :



- The metrological checking of existing meters and flowmeters according to the accuracy required. Our instruments can meet all ISO 9000 requirements, therefore being checked and certified

- The supervision of indusrial, chemical and petrochemical process…no matter the aggression or pressure of the fluid. For the measurement in Ex area (hazardous), thank you for consulting us.

- The balancing of heating or air-conditioning network, with the possibility of calculating the calorific power with the " temperature measurement " option

- The measurement on hydraulic circuit with, associated to pressure measurement, the capacity to measure a power energy

- The analysis of dense network in drinking water distribution

- The detection of leaks in networks (Vivendi)

- The flow supervision in situ of pipes before and after repairing (Salmson pumps, Sulzer)

- The measurements with a risk of radioactive contamination (Cogema, SGN...)

Precibalance



Precibalance
Dynamic Balancing Machines are made here

Precibalance has got proven expertise in supplying dynamic balancing machines in many applications working in more than forty nine countries across the world.

  • Balancing Machines for high speed turbocharger applications
  • Balancing Machines for Electrical Motor rotors
  • Balancing Machines for Fan Assembly balancing
  • Balancing Machines for Print rolls
  • Balancing Machines for brake drum
  • Semi Automatic balancing machines
  • Combination drive balancing machines
  • Balancing Machines for TFO Spindle
  • Balancing Machines for Turbines
  • Balancing Machines for Centrifuge
  • Balancing Machines for Textile rolls
  • Fly Wheel balancing machines
  • Pulleys balancing machines
  • Pump Impellers balancing machines
  • Brake drums balancing machines
  • Blower balancing machines
  • Grinding wheel balancing machines
  • Aerospace component balancing machines
  • Automotive components balancing machines
  • Rail road engine component balancing machines
  • Off highway vehicles balancing machines
  • Mining machinery component balancing machines

We also have solutions for servicing / upgrade of old balancing machines.

We have upgraded to computer based instrumentation, many makes of balancing machines like Schenck, IRD, American Hoffmann, DB Hoffmann, Tinius Olsen, Fuel Instruments and Engineers ( FIE ), ABI, etc.

IBM Cognos 8 Controller

Overview

IBM Cognos 8 Controller provides Finance organizations with unmatched capabilities for managing the close, consolidation, and reporting process. An automated, menu-driven application that is owned and managed by Finance, IBM Cognos 8 Controller can consolidate diverse ledgers representing thousands of operating units and accounts into a common chart-of-accounts structure.

IBM Cognos 8 Controller reduces close cycle times and gives you the transparency that is essential for sustained compliance with Sarbanes-Oxley and IFRS. It supports local, regional, or global requirements, and enables you to adapt to business and regulatory changes in real time.

What IBM Cognos 8 Controller Offers to Finance Leaders
IBM Cognos 8 Controller offers critical benefits for the key members of your finance team—and for the CIO, who needs to ensure compatibility with existing IT investments:

* For Corporate Controllers: IBM Cognos 8 Controller enables the corporate controller to automate the entire close process, from data collection to financial consolidation to output. Close cycle times are reduced while data integrity is assured.
* For the CFO: IBM Cognos 8 Controller reduces risk and provides the CFO with an enterprise view of key financial ratios and results. Greater visibility improves strategic decision making across the organization, while the high quality of financial results eases external reporting and compliance.
* For the CIO: IBM Cognos 8 Controller allows the CIO to leverage current IT investments while ensuring that centralized systems meet the demand for secure and reliable data. And it offers the opportunity for performance management standardization from a single vendor, with enterprise planning and business intelligence across a single architecture and platform.

IBM Cognos 8 Controller is the only solution that includes more than 200 pre-configured, standard reports to satisfy the demands of management and regulators. All the reports required at key stages of the close process are available automatically—no custom report creation is needed.

In addition, IBM Cognos 8 Controller is seamlessly integrated with IBM Cognos 8 Planning and IBM Cognos 8 Business Intelligence. It enables performance management to be integrated at the data, security and process level—all at a low total cost of ownership.
Learn more:

* Features and Benefits of IBM Cognos 8 Controller
* Read the IBM Cognos 8 Controller Fact Sheet
* Read about the 200+ Standard Reports available with IBM Cognos 8 Controller
* Visit the Compliance Resource Center
* Learn best practices thru IBM Cognos 8 Controller Performance BluePrints

UC4 certified for use with the Avaloq Banking

Automated scheduling of Avaloq Banking System (ABS) and enterprise systems with UC4 Workload Automation Suite

VIENNA, February 3, 2009 – UC4 Software, a leading global provider of workload automation, job scheduling and IT process optimization solutions, today announced the certification of UC4 Workload Automation Suite for use with the Avaloq Banking System (ABS) version 2.6. The companies have also signed a partnership agreement that will enhance Avaloq to refer customers requiring a complementary scheduling and automation solution to UC4 Software.

“The certification of the UC4 adapter enables organisations to utilise a complementary technology that has been successfully tested and validated against our Model Bank environment,” said Adrian Bult, COO, Avaloq Evolution AG. “Joint customers will be able to increase the return on their existing technology investments leveraging a solution that interfaces directly with the Avaloq Banking System.”

Avaloq solutions are changing the IT landscapes within private and retail banks in Switzerland, Germany, Liechtenstein, Luxembourg, Singapore, Hong Kong and other markets. With UC4 Workload Automation Suite enterprises remove manual intervention, reduce latency and mitigate risk from their end-to-end business processes. The UC4 Business Integration for Avaloq communicates directly with ABS through application interfaces, allowing customers to extend the automated scheduling of their core banking systems and integrate with external applications.

UC4 Workload Automation Suite can manage back-end processing for ABS and all other surrounding systems that many finance institutes rely on. Avaloq users receive regular software updates which support banks in remaining compliant with industry regulations. When utilizing additional tools it is important that Avaloq users work with solutions that are compatible and certified for use with Avaloq. This reduces maintenance and support issues and allows joint customers to benefit from the enterprise wide visibility and control provided by UC4.

“It gives UC4 great pleasure to extend its relationship with Avaloq,” said Cesare Capobianco, chief executive officer, UC4 Software. “We have benefited from an excellent working partnership working towards receiving this certification. It has allowed us to develop an interface that is compliant with Avaloq’s technical specifications, which also delivers measurable business value to our joint customers.”

About Avaloq
The Avaloq Group, with branches in Luxembourg and Singapore, is the Swiss market leader in the field of standard banking software. For over a decade, the Swiss company has been developing and marketing the Avaloq Banking System. It is trusted by leading financial service providers in private, retail and universal banking in international financial centres around the globe. A network of specialists with first-class partners in the areas of implementation, software, service and technology enables Avaloq to offer its clients a comprehensive all-in-one solution – a modular, innovative and integrated standard software for the financial sector. Avaloq is owned by its management and employees.

About UC4 Software
UC4 Software is a leading global provider of workload automation, job scheduling and IT process optimization solutions that ensure core business processes and enterprise information systems run faster, more accurately and without interruption. More than 1,600 companies worldwide have successfully enhanced application processing performance and improved IT efficiency using UC4’s business acceleration solutions. Customers include American Suzuki Motor Corporation, Cadbury, eBay, Eastman Kodak, General Electric, Mattel, McGraw Hill, Panasonic, Robert Bosch, Sun Microsystems, Symantec, T-Systems and Verizon

11 Şubat 2009 Çarşamba

The Edgeos Security Services Platform

The Edgeos Security Services Platform

Enhanced Business Value

The Edgeos platform was designed to enable you to develop and grow your business by offering managed security services for your customers.

Comprehensive Private Labeling

Every aspect of the Edgeos platform can be private labeled with your brand to provide your customers with a single interface and a turnkey security service.

  • User interface branded with your company's look and feel. Made to appear as an extension of your website.
  • Many built-in report templates including Network Overview, Differential, Business Impact, Technical Detail, and PCI Compliance, to name a few. All reports are automatically private labeled for your business and can be further customized for content, layout, style, data sets and more.
  • Create scanning servers/appliances, Interactive Threats Database, newsletter templates, and more all private labeled and included with the Edgeos platform.

Business Model Flexibility

Your business is in control of the right service offering and pricing model for your customers. Any of the following models are possible with Edgeos' platform:

  • Assessments to generate new revenue from remediation business and consulting.
  • Ongoing, automated vulnerability assessments with a set recurring monthly fee.
  • Charge per host scanned (unlimited number of scans).
  • Vulnerability scanning as part of a custom service offering.
  • Any other model that best suits your business and your customers.

Simple Pricing Model

Edgeos' pricing is literally tied to your success, scales as your usage grows, and is agnostic of company size.

  • Pricing based on number of unique hosts scanned per month.
  • Aggressive volume discounts applied automatically.
  • No hidden costs or setup charges.

Revenue Growth Engine

Use Edgeos' built-in Generate Leads feature to identify new remediation services opportunities every time your customers perform a vulnerability scan.

Continuous Brand Exposure

Keep your business at the top of your customers' minds as they utilize your web-based security services portal and realize real value from every interaction. Focus on your customers' security and in turn, they will stay focused on you.

More Details

See more details about the features and benefits of the Edgeos Security Services Platform. More Details...


Leading Capabilities

The Edgeos platform puts the power of advanced security services in your hands through rich functionality and capabilities.

Accurate and Up-to-Date

Database of over 24935 vulnerabilities. Updated every 12 hours.

Regulatory/Standards Compliance

Meets or exceeds all vulnerability scanning requirements for many regulations and industry standards (e.g. PCI, SOX, HIPAA, GLBA, and many more).

Completely Web-Enabled

Completely browser-based, enabling secure interaction and management from any location.

External and Internal Scanning

Reach all segments of any network with external and internal scans, all integrated with a single user interface.

Extensive Scaleability

Scaleable across enterprises and networks of any size, and the ability to create scanning servers/appliances is included with the Edgeos platform.

Designed for Automation

Automated scanning adjustable to your business and customer needs. Automated custom reporting delivers comprehensive results to customers without manual intervention.

Interactive Data Analysis

The Interactive Report interface enables on-the-fly manipulation of vulnerability assessment results for remediation management and customized reporting. In addition to technical details, results can be summarized in many forms, including differentials, historical trending, threat overviews, and executive summaries.

Centralized Customer Management

Easy to use interface allows for centralized control of customer account creation, privileges, logins, roles, and other settings. Enable end-users to run their own security services through your company's security services portal.

Everything Is INCLUDED!

  • Unlimited scans for unique hosts
  • Private labeled security services portal
  • Sub-accounts for customer logins (private labeled)
  • Private labeled and customizable professional reports
  • "Master" account control of sub-account rights and permissions
  • Customizable Dashboard management and statistics interface
  • Automated new business "leads generator"
  • Private labeled threats database, including browse and search
  • Private labeled newsletter generator
  • Custom CD image to create scanning servers and/or appliances
  • Volume discounts applied automatically
  • Discovery, external, and internal scanning

The Edgeos team

Security Tools and Resources

The Edgeos team is actively involved in participating and supporting the global community of security and technology professionals. All of the tools and resources provided in this section of the Edgeos web site are created and/or sponsored by Edgeos, and are available for free. We welcome your comments and feedback about these resources, or ideas about other tools and resources we can provide.

Security Vulnerabilities and Threats Database

Browse and search Edgeos' database of vulnerabilities and exploits. The database currently contains 24935 unique vulnerabilities, is updated every 12 hours, is cross-referenced by threat family and risk factor, and links to external sources (such as CVE, Bugtraq, and OSVDB). (View Edgeos' Security Threats Database)

Security Announcements and Alerts

Edgeos' New Vulnerabilities free email newsletter and RSS news feed provides fast notifications and summaries of new security vulnerabilities when they are added to Edgeos' threats database. (More about Security Alerts)

Nessus Knowledge Base

The Nessus Knowledge Base contains information and documentation about nearly every option and configuration variable for the Nessus vulnerability scanner. Each option is documented and cross-referenced, including a name, description, default setting, enable/disable considerations, scan/host/network impacts, option relationships, and much more. (View the Nessus Knowledge Base)

9 Şubat 2009 Pazartesi

High Flow Range Mass Coriolis Flow Meter

High Flow Range Mass Coriolis Flow Meter



ideal for the measurement of flow, density and temperature of liquids and slurries, such as aggressive or contaminated, sanitary or particle-filled fluids.

Features:
  • Flow ranges from 60 to
    60K Kg/Hr (2.2 to 1650 lb/min)
  • Accuracy up to 0.25% of reading
  • Materials: flow tubes -
    316 L, splitter flanges -
    316 Ti, housing - cast iron
  • Process temperature
    -40°F to 356°F
  • Ambient temperature
    -40°F to 140°F
  • Wide flow ranges
ACCURATE AND RELIABLE
This meter has the ability to
maintain high accuracy,
despite changing
viscosity conditions, with accuracy of +0.25% of reading.
EASY CLEANING
The ACM series has smooth stainless steel tubes and no moving parts, and is therefore very easy to flush and clean.
MULTI-TASKING
The ACM series of mass coriolis flow meters measure flow, density and temperature.
MATERIAL COMPATIBILITY
Because of the meter's 316 stainless steel flow tubes, the ACM series can measure a wide range of materials.
VARIETY OF ELECTRONICS
Electronics available for the ACM series include a local, hazardous rated display and a remote, panel-mount digital display.

3 Şubat 2009 Salı

ASC process systems

ASC is a leading manufacturer of specialized process equipment, control systems, and custom manufacturing software used in the composites, plastics, glass, solar, lumber, and concrete, coatings, and finishing industries. Our product lines include composite autoclaves, glass-laminating autoclaves, concrete autoclaves, industrial ovens, composite ovens, electroplating automation systems, process control software, autoclave control software, oven control software, and crane and hoist control software including scheduling. We're located in Los Angeles, CA and support thousands o
Autoclaves and other equipment
ASC manufactures a range of process equipment, including autoclaves, ovens, presses, heating systems, cooling systems, vacuum systems, and specialty pressure equipment. We also buy and sell used equipment.
systems and hundreds of customers w
Control & power systems
ASC is a leading supplier of control and power systems for a wide variety of equipment and industries. We specialize in PC-based and PLC-based control solutions. Our PC-based systems typically feature our industry-standard CPC control software package.
orldwide.
Software for controls and manufacturing
ASC can develop custom software solutions for a wide variety of manufacturing applications. Our CPC software is the world's leading software for control of autoclaves, ovens, and many other applications. Our FLEXTIME software is also the leading PC-based solution for electro-plating and anodizing control

KYC compliance

KYC compliance

Know Your Customer (KYC) compliance regulation has proved to be one of the biggest operational challenges banks, accountants, lawyers and similar financial service providers worldwide have had to overcome.

World-Check, the industry standard KYC compliance solution, provides an overview of KYC compliance and its origins, and outlines the compliance mandate as applicable to banks, accounting firms, lawyers and other regulated financial service providers – not just in the UK, Europe and the USA, but all around the world. Relied upon by more than 3,000 institutions worldwide, this KYC database solution provides effective legal and reputational risk reduction.

Why “Know Your Customer?”


The 9/11 terrorist attacks on the World Trade Centre revealed that there were sinister forces at work around the world, and that terrorists activities were being funded with laundered money, the proceeds of illicit activities such as narcotics and human trafficking, fraud and organised crime. Overnight, the combating of terrorist financing became a priority on the international agenda.

For the financial services provider of the 21st century, “knowing your customers” was no longer a suggested course of action. Based on the requirements of legislative landmarks such as the USA PATRIOT Act 2002, modern Know Your Customer (KYC) compliance mandates were created to simultaneously combat money laundering and the funding of terrorist activities.

What is Know Your Customer (KYC)?


Know Your Customer, or KYC, refers to the regulatory compliance mandate imposed on financial service providers to implement a Customer Identification Programme and perform due diligence checks before doing business with a person or entity.

KYC fulfils a risk mitigation function, and one its key requirements is checking that a prospective customer is not listed on any government lists for wanted money launders, known fraudsters or terrorists.

If preliminary KYC checks reveal that the person is a Politically Exposed Person (PEP), for example, Advanced Due Diligence must be done in order to ensure that the person’s source of wealth is transparent, and that he or she does not pose a reputational or financial risk in terms of their finances, public positions or associations. Beyond customer identification checks, the ongoing monitoring of transfers and financial transactions against a range of risk variables forms an integral part of the KYC compliance mandate.

But to understand the importance of KYC compliance for financial service providers better, its origins need to be examined.

Origins of Know Your Customer (KYC) compliance


The arrival of the new millennium was marred by a spate of terrorist attacks and corporate scandals that unmasked the darker features of globalisation. These events highlighted the role of money laundering in cross-border crime and terrorism, and underlined the need to clamp down on the exploitation of financial systems worldwide.

Know Your Customer (KYC) legislation was principally not absent prior to 9/11. Regulated financial service providers for a long time have been required to conduct due diligence and customer identification checks in order to mitigate their own operation risks, and to ensure a consistent and acceptable level of service.

In essence, the USA PATRIOT Act was not so much a radical departure from prior legislation as it was a firmer and more extensive articulation of existing laws. The Act would lead to the more rigorous regulation of a greater range of financial services providers, and expanded the authority of American law enforcement agencies in the fighting of terrorism, both in the USA and abroad.

In October 2001, President George W. Bush signed off the USA PATRIOT Act, effectively providing federal regulators with a new range of tools and powers for fighting terror financing and money laundering. During July 2002, the US Treasury proceeded to introduce Section 326 of the PATRIOT Act, a clause that removed some key burdens for regulators and added significant enforcement muscle to the Act.

What 9/11 changed, in essence, was the extent to which existing legislation was being implemented. Using the provisions of the earlier anti-terrorism USA Act as a foundation, it included the Financial Anti-Terrorism Act, which allowed for federal jurisdiction over foreign money launders and money laundered through foreign banks. Significantly, it is this anti-terror law that would make the creation of an Anti Money Laundering (AML) programme compulsory for all financial institutions and service providers.

Section 326 of the USA PATRIOT Act dealt specifically with the identification of new customers (“CIP regulation”), and made extensive provisions in terms of KYC and the methods employed to verify client identities.

In accordance with this piece of updated KYC legislation, federal regulators would hold financial institutions accountable for the effectiveness of their initial customer identification and ongoing KYC screening. Institutions are required to keep detailed records of the steps that were taken to verify prospective clients’ identities.

Although current KYC legislation does not yet demand the exclusion of specific types of foreign-issued identification, it recommends the usage of machine-verifiable identity documents. The ability to notify financial institutions if concerns regarding specific types of identification were to arise, combined with a risk-based approach to KYC, proved to provide a robust mechanism for addressing security concerns.

Effectively, the risk-based approach to customer due diligence grants regulated institutions a certain degree of flexibility to determine the forms of identification they will accept, and under which conditions.

KYC compliance: Implications for banks, lawyers and accounting firms


The KYC compliance mandate, for all its positive outcomes, has burdened companies and organisations with a substantial administrative obligation. Additionally, KYC compliance increasingly entails the creation of auditable proof of due diligence activities, in addition to the need for customer identification.

3 Ocak 2009 Cumartesi

Recover, Repair, Recycle

Huntron Scanners
Huntron Scanners
Add Scanning Capabilites to Your Huntron Tracker Model 30 System
Tracker Model 30 shown with Scanner II underneath
Adding a Huntron® Scanner to your Tracker Model 30 system lets you access components using standard DIP clips and cables, custom cables to PCB connectors or interface to a bed-of-nails.You can compare one component with another in real-time (64 pins max.) or use your PC to automate testing and scan up to 128 pins.Huntron Scanners can be used with a Huntron Access Prober to provide Common line connections while the Prober is probing a PCB. This method gives you up to 128 selectable Commons to use. For example, you can connect the Scanner to a connector on a PCB mounted in the Prober using a common ribbon style cable. While the Prober is probing, any one of the lines on the connected ribbon cable can be selected as the Common reference. This would provide you true point-to-point testing capabilities.Note: The ProTrack Scanner will be replaced by the Scanner II and/or the Scanner 31S effective 1/1/2008. This applies to commercial sales only.Scanner II and Scaner 31S users may want to consider these Optional Accessories to enhance their test capabilities.
Highlights:
The Scanner II and Scanner 31S accessories add scanning capability to the Tracker Model 30
All Scanners have a minimum 64 pin capability
The Scanner II can scan up to 128 pins when the A and B channels are combined
The Scanner 31S use standard IDC style connectors
The Scanner II uses the common SCSI-2 (68 pin) style connectors
Up to 8 Scanner IIs can be “daisy-chained” to increase the available number of test pins
Selecting Accessories for your Scanner IIThe Scanner II accessories for interfacing to your printed circuit board come "ala carte". This means that you select the accessories you want included with your Scanner. Choose from SMT or through-hole style DIP clip and cable kits (Scanner Adapter required with Scanner II) or a mutli-pin breakout cable. Details on these accessories are provided on this page.
Specifications
Max. Number of Test pins
Scanner IIScanner 31SProTrack Scanner
128 (per Scanner)64128 (both channels combined)
Number of Channels
Scanner IIScanner 31SProTrack Scanner
212
Number of Pins per Channel
Scanner IIScanner 31SProTrack Scanner
646464
Front Panel Connectors
Scanner IIScanner 31SProTrack Scanner
SCSI-2 (68 pins)IDCIDC
Part Number
Scanner IIScanner 31SProTrack Scanner
99-039399-039999-0098
Dimensions (Scanner II and 31S)
11.1in W x 1.8in H x 8.6in D(28.2cm W x 4.6cm H x 21.8cm D)
Certifications
CE and ETL listed
Warranty
1 year limited
Supplied Accessories with Scanners
Huntron P/N
Qty
Description
Available Online?
All Scanners
06-5217
1
Manuals CD

Scanner II
98-0480
1
Interface Cable
-
Scanner 31S
98-0103
1
Cable Assembly, 20 pin clip

98-0102
1
Cable Assembly, 40 pin clip

07-1234
1
Clip, 20 pin
-
07-1230
1
Clip, 40 pin
-
98-0480
1
Interface Cable